The Thermidoor is a specifically designed insulated roller shutter door system for use in factories, garages & warehouse facilities to provide security,  reduce energy costs and also to offer high acoustic properties to 29 db.The curtain is made from twin skinned lath design incorporating a CFC free infill significantly reducing heat loss and offer a robust durable door system.

Specification:
Curtain
100mm wide profiled laths 0.7 / 0.9 mm
thick. Continuous interlocking galvanized laths available with vision panels. Core infill ranges from 10kg /15kg CFC free foam. Depending on 
ranges from 10kg /15kg CFC free foam. Depending on door dimensions nylon, steel or extra wind
wind  locks are used to secure the curtain. Bottom Rail is 
curtain. Bottom Rail is supplied with an EPDM gasket to prevent leakage and to increase insulation properties.
leakage and to increase insulation properties.

Barrel
Constructed from seamless steel tubing of
adequate diameter to resist deflection. Fixed using bearings or plates attached directly to the
endplates.
endplates.
Guides
5mm galvanized steel wind-guide channels;
75mm in width and 68mm in dept. Guides are supplied with twin pile brush strips to prevent
drafts.
drafts.
Endplates
Mild Steel endplates 300*300, 305*305
& 405*405 depending on shutter door requirements.
Finish
Thermidoor is available in a galvanized
finish / powder coated / plastisol.
Override Facility
Hand crank / Chain override
Electrical
Operation
• 415v 3 ph Marantec Dynamic 400 – 406
with adjustable limit switches  (1 phase
available)
available)
• 240v 1 ph  Eurodrive motors with adjustable limit
switches
switches
Control Options
Vast range of controllers available for
please ask for more details. Standard door
Low level open/close/stop buttons • Key switch •